- Drivers (Download | How to install drivers)
- SP Flash Tool (Download)
- My|phone Rio Lite firmware (Download)
- Stock Preloader (for 8 GB model | for 4 GB model)
- Micromax Unite 2
To flash jellybean ROM follow these steps:
Step 1: Extract/Unzip all downloaded files. Copy preloader.bin to Jellybean ROM folder
Step 2: Open SP flash tool and load the Scatter file from Jellybean ROM folder
Step 3: Select all files by clicking the Location column of each row. Select secro.img for CACHE AND USRDATA. See below pic
Step 4: Select Firmware Upgrade in drop-down menu.
Warning: Don’t select “Format all + download”. Otherwise you’ll lose IMEI number. Make sure you have NVRAM backup
Step 5: Switch off phone and remove the battery.
Step 6: Click Download in SP Flash Tool.
Step 7: Insert battery and connect your phone via USB cable (Don’t switch on). Wait for approx 3 min 33 sec to complete flashing.
If your phone starts charging battery then it means your phone is not detected by sp flash tool. Check drivers, disable antivirus. Click stop in sp flash tool, remove USB, reinsert battery and connect phone via USB.
After successful flashing you will see a green circle.
Step 8: Remove USB cable and press vol+, vol- and power on buttons to reboot to recovery.
Step 9: You will see an android icon in stock recovery. Press power button to see recovery options.
Step 10: Press vol down button to select wipe data/factory reset then tap menu key (left).
Step 11: Press vol down button to select Yes — delete all user data then tap menu key.
Step 12: Select reboot system now and tap menu key.